top of page
CRONUS Achos Case
  • CRONUS Achos Case

    CRONUS ACHOS

    The New CRONUS ACHOS is a Mid Tower professional gaming case, supporting a simple and easy to build internal structure, with 4mm tempered glass front and left side panel, allowing you to see the beautiful lighting from the ARGB fans inside.

    Supporting up to 6 fans for superior air cooling and comes fitted as standard with 4 x 120mm F1 ARGB LED fans, 3 at the front and 1 at the back. All switchable through the I/O Panel or through your motherboards internal software via the 3-pin ARGB connector. (Supported motherboards only). To Sync the RGB lights on the case with the motherboard software. Hold down the button the on the case that you would use to cycle through the colours for a few seconds, it will transfer the control from the case to the board.

    You can enhance your cooling further with room at the front for a radiator up to 240mm and 120mm at the rear. This gaming case has good compatibility, it supports ATX, Micro ATX, Mini-ITX motherboards and ATX power supplies, with cabling hidden behind the black PSU shroud. On the top of the case for easy access is 1 x USB 3.0, 2 x USB 2.0 and HD audio allowing you to connect to a variety of devices, as well as your ARGB switch for on-the-fly chaning of the LEDs on your fans.

    Key Features
    - Stylish Exterior: 4mm thick tempered glass front and left side panel not only gives the ACHOS a professional look but allows you to show off the lighting coming from your fans.
    - Fans: Supports up to 6 fans with 4 x F1 ARGB fans included to give your case some added colour in your finished build.
    - Water-Cooling Support: As well as supporting 6 fans the ACHOS supports a radiator up to 240mm at the front and 120mm at the rear to give you extensive cooling support.
    - I\O Panel: Easy accessible 2 x USB 2.0 and 1 x USB 3.0 ports on the top with transfer speeds of 5Gbps means you can connect to a range of media devices.
    - Removable Dust Filters: A dust filter on the top and bottom helps to prevent dust from getting into your build and improve the performance of your chassis.

    Form Factor
    Mid Tower

    Motherboard Support
    ATX
    Micro ATX
    Mini-ITX

    PSU Support
    Standard ATX

    PSU Location
    Bottom

    PSU Included
    No

    Water Cooling Ready
    Yes

    Supported Radiator Size
    Front: Up to 240mm
    Rear: Up to 120mm

    Material
    Body: 0.5mm SPCC
    Front and Side: 4mm Tempered Glass

    Side Panel
    4mm Tempered Glass

    Drive Bays
    Internal: 2 x 3.5" / 2 x 2.5"

    Expansion
    Slots: 7

    Cooling
    Front: 3 x 120mm / 3 x 140mm Fans (3 x 120mm F1 ARGB Fans included)
    Top: 2 x 120mm / 2 x 140mm Fans
    Rear: 1 x 120mm Fan (1 x 120mm F1 ARGB Fan included)
    Side: None
    Bottom: Filtered Vent For PSU

    IO Ports
    1 x USB 3.0
    2 x USB 2.0
    HD Audio
    ARGB Switch

    Clearence
    Internal Cable Management Depth: 15mm
    GPU Max Length: 350mm
    CPU Cooler Maximum Height: 160mm
    PSU Shroud: Included

    Colour
    Black

    Product Dimensions ( L x W x H )
    405 x 195 x 450mm

    Weight
    Net: 5.9 KGs
    Gross: 6.7 KGs

    • Key Specifications

      Form Factor Mid Tower
      Motherboard Support ATX / Micro ATX / Mini-ITX
      PSU None
      Case Colour Black
      LED Colour Addressable RGB
      USB 3.0 1
      Side Panel Tempered Glass
    £55.00Price
    Product Page: Stores_Product_Widget
    bottom of page